Page 671

Cooking Equipment Volume 2

FIRST CHOICE CATERING SPARES LTD Electronic Cold Water Softeners Part No Description ELECTRONIC AUTOMATIC COLD WATER SOFTENERS Suitable for cold water 2-35°C (protect from freezing). With Logix electronic timer for automatic regeneration with variable regeneration time and frequency to suit water throughput from 1 to 99 days between regenerations and up to 2 regeneration cycles a day can be pre-set. Can be set on a daily basis to avoid weekends. 12V low voltage operation - plug in transformer supplied for a 240V 3A electrical supply Supplied with install kit of ¾”BSP reinforced flexible hose, ½” drain hose and ½” overflow hose. Water consumption for regeneration is approximately 4% of the rated capacity. AT5 ELECTRONIC COLD WATER SOFTENER 660 LITRE CAPACITY 660 litres water capacity 0.7 kg salt capacity dimensions 520(H) x 280(W) x 450(D) mm 3/4” water inlet/outlet connections 1/2” BSP drain at height of 354mm height of overflow 292mm (requires gravity feed to drain) 1.5-4.5 bar water pressure (see note below) AT10 ELECTRONIC COLD WATER SOFTENER 1494 LITRE CAPACITY 1494 litres water capacity 1.5 kg salt capacity dimensions 610(H) x 280(W) x 450(D) mm 3/4” water inlet/outlet connections 1/2” BSP drain at height of 470mm height of overflow 370mm (requires gravity feed to drain) 1.5-4.5 bar water pressure (see note below) AT14 ELECTRONIC COLD WATER SOFTENER 2250 LITRE CAPACITY 2250 litres water capacity 2.4 kg salt capacity dimensions 665(H) x 280(W) x 450(D) mm 3/4” water inlet/outlet connections 1/2” BSP drain at height of 604mm height of overflow 518mm (requires gravity feed to drain) 1.5-4,5 bar water pressure (see note below) AT18 ELECTRONIC COLD WATER SOFTENER 2900 LITRE CAPACITY 2900 litres water capacity 2.8 kg salt capacity dimensions 665(H) x 280(W) x 450(D) mm 3/4” water inlet/outlet connections 1/2” BSP drain at height of 507mm height of overflow 420mm (requires gravity feed to drain) 1.5-4.5 bar water pressure (see note below) Note If water pressure is less than 1.5 bar (22 psi) pressure booster set IP13 is recommended (suitable for cold/hot water supply) or use pumped water softener CW10PS (for cold water supply only). If water pressure exceeds 4.5 bar (65 psi) a pressure reducing valve should be fitted. MECHANICAL COMPONENTS Tel: 01543 577778 Fax: 01543 504141 Email: enquiries@firstchoice-cs.co.uk Web: www.firstchoice-cs.co.uk 663


Cooking Equipment Volume 2
To see the actual publication please follow the link above